Best crosscut saw blade Reviews

When looking for the best crosscut saw blade you can buy – remember that having a great quality crosscut saw blade in your home is important. I know it’s important to save money and I do suggest not to go over your budget – but don’t just look for the cheapest one – having a great crosscut saw blade will actually save you money down the road.

On the lists below you will be able to see our picks for the best crosscut saw blade you can buy today – we done an extended research – taking all the most important factors and proud to share with our readers our unbiased picks

Best crosscut saw blade

Last update on 2018-01-24 / Affiliate links / Images from Amazon Product Advertising API - More info

Best crosscut saw blade Reviews

Bestseller No. 1Bestseller No. 1
Festool 495381 Fine Tooth Cross-Cut Saw Blade For TS 75 Plunge Cut Saw - 52 Tooth
7 Reviews
Festool 495381 Fine Tooth Cross-Cut Saw Blade For TS 75 Plunge Cut Saw - 52 Tooth
  • 52 tooth; 2.4mm kerf; 30mm arbor; 8 deg hook angle; ATB
  • Cross-cut blade for smooth cuts in veneered plywood, sheet goods, melamine, and hard and soft woods
  • Oversized 30mm arbor enables more secure fastening of the blade to the saw, reducing vibration for more precise cutting
  • Thin kerfed blades meet less resistance, for more efficient cutting, and produce less material waste
  • Laser cut expansion slots reduce vibration for faster, quieter cutting
Bestseller No. 2Bestseller No. 2
8.1/4" CROSS-CUT SAW BLADE
  • A genuine product of the world renowned Japanese tool manufacturer, Makita, this cross-cutting circular saw blade with thin kerf design has 50 total teeth (6 TPI) and will be a staple in your toolbox
  • 8-1/4in. x 1/24in. kerf x 5/8in. arbor opening diameter with a max speed of 6,360RPM
  • Hand-hammered by skilled saw technicians for guaranteed flatness
  • Precision ground teeth permit a clean cutting surface and a long blade life; hardened steel body prevents blade warping
  • Premium quality steel construction manufactured in Japan to the highest standards with the best materials
SaleBestseller No. 3Bestseller No. 3
Makita A-93712 12-Inch 60 Tooth Micro Polished Mitersaw Blade
15 Reviews
Makita A-93712 12-Inch 60 Tooth Micro Polished Mitersaw Blade
  • Micro-Grain Carbide Teeth are Honed with up to 600 Grit for a Mirror Finish
  • Fully Hardened and Expertly Hand Tensioned Steel Saw Plates for True Cuts
  • Ultra Thin Kerf .091-inch, 5 Degree Hook Angle, and .071 Plate Thickness
  • Smooth Crosscutting
  • Ideal for: Particle Board and Laminates
SaleBestseller No. 4Bestseller No. 4
DEWALT DW3215PT 10-Inch 60 Tooth ATB Crosscutting Saw Blade with 5/8-Inch Arbor and Tough Coat Finish
74 Reviews
DEWALT DW3215PT 10-Inch 60 Tooth ATB Crosscutting Saw Blade with 5/8-Inch Arbor and Tough Coat Finish
  • Premium Micro-Grain carbide produces ultra-sharp cutting edges that dramatically reduce splintering
  • Precision balanced, laser-cut body provides extremely accurate cuts
  • Exclusive Dampening Slots reduce vibration to enhance cutting accuracy
  • Tough Coat Finish reduces heat, friction, and gum to promote blade life
SaleBestseller No. 6Bestseller No. 6
Makita 7210038 3-3/8' Cross Cut Circular Saw Blade
11 Reviews
Makita 7210038 3-3/8" Cross Cut Circular Saw Blade
  • Ultra think-kerf design for lighter cutting load
  • Specially designed for cordless saws to conserve energy and permit more cuts per charge
  • Individually hand-hammered by skilled Saw technicians for guaranteed flatness and proper tension to make the perfect cut
  • For use with Makita 5090D
Bestseller No. 7Bestseller No. 7
Neiko 10765A 10' Carbide Tipped Circular Saw Blade for Wood | 60 Tooth| ATB Crosscut Fine Finish | 5/8' Arbor
6 Reviews
Neiko 10765A 10" Carbide Tipped Circular Saw Blade for Wood | 60 Tooth| ATB Crosscut Fine Finish | 5/8" Arbor
  • Round saw blade has carbide tips on each tooth for increased durability, longer service life, and suitability as a general purpose wood saw blade
  • Expansion slots on the side of the saw blade increase heat tolerance and reduce vibration to enhance accurate cutting of ultra fine edges
  • Suitable for cross cutting solid wood and sawing general plywood, hard wood, soft wood, composites, MDF, melamine, moulding, particleboard
  • Saw blade has 60 ATB crosscut teeth and a thin 1.8mm kerf for a smoother, cleaner cut across woodgrain; smaller gullets prevent saw from feeding too fast
  • Ten inch, 60 tooth circular saw blade on a 5/8" arbor for table saws, chop saws and miter saws; 7/8" knockout; 5500 RPM max speed (80 m/s)
Bestseller No. 8Bestseller No. 8
CMT 256.050.10 ITK Industrial Combination Saw Blade, 10-Inch x 50 Teeth 1FTG+4ATB Grindwith 5/8-Inch Bore
18 Reviews
CMT 256.050.10 ITK Industrial Combination Saw Blade, 10-Inch x 50 Teeth 1FTG+4ATB Grindwith 5/8-Inch Bore
  • For rip and crosscuts. The large gullets allow deep cuts and effective chip clearance.
  • Cut solid wood, melamine, laminates, plywood, chipboard. Use on radial arm/miter saws, table saws.
  • 0.098 kerf thickness, 0.071 plate thickness, 15° Hook Angle, 1 Flat + 4/20° alternate teeth Grind.
  • Micrograin carbide for long-lasting cutting performance and smooth cut on wood/wood products.
  • Laser-cut plate features expansion slots to reduce noise and anti-vibration design.
Bestseller No. 9Bestseller No. 9
Freud 10' x 80T Ultimate Plywood & Melamine Blade (LU80R010)
81 Reviews
Freud 10" x 80T Ultimate Plywood & Melamine Blade (LU80R010)
  • 10" Blade Diameter, 80 Teeth, Hi-ATB Grind, 5/8" Arbor, .126" Kerf, 2° Hook Angle
  • Premium TiCoTM Hi-Density Carbide Crosscutting Blend for Maximum Performance
  • High Alternate Top Bevel (HiATB)Tooth Design produces splinter-free cuts
  • Laser-Cut Anti-Vibration Slots drastically reduce vibration and sideways movement in the cut extending blade life and giving a crisp, splinter-free flawless finish
  • Perma-ShieldTM Non-Stick Coating reduces blade drag, protects the blade from corrosion and pitch build-up.
Bestseller No. 10Bestseller No. 10
CMT 281.060.10 Industrial Cabinetshop Saw Blade, 10-Inch x 60 Teeth TCG Grind with 5/8-Inch Bore
  • For heavy-duty crosscuts, perfect finishing on single-sided laminated panels.
  • Cut chipboard, MDF, laminates, wood, plywood. Use on radial arm/miter saws, table/special saws.
  • 0.126 kerf thickness, 0.087 plate thickness, 10° Hook Angle, Trapezoidal Teeth Grind.
  • Chrome carbide cutting edges to guarantee great and long-lasting performance on soft/hardwood.
  • Anti-vibration design, expansion slots to reduce noise, tight tolerance, longer lifetime.

Last update on 2018-01-24 / Affiliate links / Images from Amazon Product Advertising API - More info

I found the perfect crosscut saw blade but it’s above my budget – what should I do?

You should never go above your budget when buying a new crosscut saw blade – the stress of being in debt does not worth it. do an extended research and see if you can find another crosscut saw blade that does fit your budget and can work for you. if you still can find anything try looking for a good shape second hand crosscut saw blade that does fit your budget an your needs.

I’m a little confuse with the huge variety of crosscut saw blade – what to do?

It’s very natural to be a bit overwhelmed with the huge variety of crosscut saw blade you can buy today. but remember that having so many crosscut saw blade to pick from is great to us as customers.
try to narrow down your list to around 3 of the best crosscut saw blade you can find (that fits your budget) and take it from there.

Something is not right with the crosscut saw blade I bought, can i return it?

It’s very safe to buy on Amazon and as someone who buy on amazon on a regular basis (not only crosscut saw blade – but everything almost) I never had any issue with them. they have a great customer support team and if something is not right with your order – they will always have your back.

 

More Best Products:

 

Best saw wrench Reviews