A quality digital miter saw is an important item to have in your house – we do suggest not to look for the most cheap digital miter saw you can buy but instead look for the one who will give you best value. a cheap digital miter saw can cause issues down the road an eventually cost you more money.
As finding the best and most affordable digital miter saw is not always easy – we have done the research for you and below you will find our top picks for the best digital miter saw available today
Best digital miter saw
|1||Milwaukee 6955-20 12-Inch Sliding Dual Bevel Miter Saw with Digital Miter Angle Fine Adjust||99 Reviews||$649.00||Buy on Amazon|
|2||Wixey WR300 Digital Angle Gauge||No ratings yet||$45.50||Buy on Amazon|
|3||GemRed 82305 Digital Angle Finder 7-Inch Protractor (200mm Stainless Steel Angle Finder Ruler)||280 Reviews||$18.99||Buy on Amazon|
|4||Capri Tools 20005 Digital Angle Gauge||67 Reviews||$29.99||Buy on Amazon|
|5||iGaging Digimit Digital Miter Saw Gauge||2 Reviews||$27.95||Buy on Amazon|
|6||CMT DAG-001 Digital Angle Gauge||34 Reviews||$32.71||Buy on Amazon|
|7||General Tools 824 Digital Angle Detector||265 Reviews||$22.75||Buy on Amazon|
|8||Digital Angle Gauge||4 Reviews||$29.80||Buy on Amazon|
|9||iGaging 35-0928 Digital Saw Gauge||107 Reviews||$59.95||Buy on Amazon|
|10||24 in. Universal Digital Miter Gauge with Magnetic blade attachment||No ratings yet||$95.00||Buy on Amazon|
Last update on 2018-01-04 / Affiliate links / Images from Amazon Product Advertising API - More info
Best digital miter saw Reviews
- Miter angle fine adjust with detent override makes it simple to dial-in precise miter angles
- Miter angle digital readout provides repeatable accuracy to 0.1 degree
- Dual integral job-site lights fully illuminate the work piece and cut line from either side of the blade
- 15-amp, 3.3 max hp direct-drive motor provides increased power for high-performance cutting in hard lumber
- Integral dust channel captures 75 percent of all dust and debris
- 0.1 degree resolution, accuracy, and repeatability
- Works great for miter saws and table saws
- Resolution 0.05mm, 0.001-inch, 1/64-inch
- Magnets attach to saw blades and cast iron table tops
- unctions include an ON/OFF button and a ZERO button
- Designed for completing numerous tests in your shop
- Test your table saw alignment, fence alignment
- Super strong magnets enable this gauge to securely attach to saw blades
- Automatic LCD backlight has a 0.1 degree resolution display, shut-off feature, and digit inversion
- This is an accurate and precise measuring device to help with the best repair work
- A custom carrying pouch is included for extra protection and easy access
- Works great with miter saws and table saws for producing precise measurements
- Ruler and protractor combination for easy measuring. Durable stainless steel body provide years' using. Total length 400mm.
- Accuracy ±0.3°; resolution 0.1°. Working temperature: -10 ℃~+50℃
- Quick and clear digital readout.
- Zeroing at any angle for relative measuring. Locking screw for holding any angle.
- Working more than 2000 hours with one piece of CR2032 coin battery(included).
- Take the guess work out of verifying your miter saw cut angle
- Increase the accuracy of your saw from 1 degree to 0.1 degree
- ACCURATE ANGLE MEASUREMENTS- Measures the angle of any surface with respect to the horizontal (absolute mode) or a reference surface (relative mode). Used to set blade angles on lathes, milling machines and miter, band, table, chop and circular saws. BONUS: Any reading in degrees can be converted to a percentage to indicate slope
- COMPACT- This 2.1-inch x 2.1-inch mini digital protractor is small enough to fit in your pocket or slide into a tool belt with ease.
- MEASURE NOW, CUT LATER- Don't have a pen or pencil handy, measurement HOLD button saves readings for convenient viewing later
- AUTO ROTATE DISPLAY- value always shows right side up, whether the unit is upside down or not
- MAGNETIC- Built-in strong magnets on the protractor, attach to a saw blade, jointer fence or other metal surfaces. Even attaches to metal tool boxes for easy access.
- Harbor Freight Tools
- Provides digital readings between ±180° with a resolution of 0,1° and auto shut off after 5 minutes.
- Easy-to-read LED display.
- Incorporates magnets in the base for adhesion to any ferrous surface for accurate measurements.
- Battery voltage/type 3V/L lithium, resolution 0.1°.
- Size: 2 x 2 x 1-1/4-Inch.
- Magnetic blade attachment for precise blade-tilt-angles
- Zero button calibrates the current position to zero
- Micro Adjust Gauge for highly accurate, repeatable cuts with +/- .1% digital accuracy
- T-slot washer adjusts for table saws with standard T-slot openings of 7/8 in., 5/8 in. and 3/4 in.
- Product Dimensions: 3"H x 24"W | Weight:
- This precision bench saw makes perfect cuts in soft metals, wood and plastic in 1/10th the time it takes by hand.
- This bench top saw is so accurate that you might never have to file or sand ends.
- Fast 7800 rpm and a 3/8-Inch arbor
- 2-Inch blade diameter and a .020 inch blade thickness, 1/2" Cutting Depth 0-45 Degree Miter, 71" Power Cord, Includes 2" Blade & Table Clamp
- 1 Year Warranty!
- Laser Line N/A
- Power Source Separate Power Supply. DEWALT Miter Saws are pre-wired to accept power supply
- Idle Operation Light Illuminates without blade operation
- Switch On/Off
- Compatible with DW713, DW715, DW716, DW717, DW718
- Ultra-slim size, all aluminum alloy frame structure.
- Two strong magnets are built in the side and the bottom surface, which is convenient to measure the horizontal and vertical.
- High accuracy and resolution.
- Degree and Percentage of slope in conversion.
- Calibrate button to calibrate the meter to any reference surface. Displayed readings remain upright to enable easy viewing at all angles. Applications: Drive line Measurement. Race car wing and chassis adjustment. Wheel alignment. Drainage angles and run-off slopes. Tool setting on Lathes. Setting blade angle of Circular Saws/Miter Saws. Setting work piece angle for milling. Platform monitoring. Check drill press table setting, table saw, jointer table, band saw, jointer fence or band saw table
- GREATEST MITER TOOL EVER - transfers inside and outside corner angles to your miter saw so you can cut the perfect angle for a perfect fitting joint (works with both base and crown moldings)
- EASY AND FAST- adjust the angle, place on saw, align and cut - that's it
- REDUCES ERRORS & PREVENTS WASTE - precise measurements that provide exact miter cuts for 60 to 300 degree corners (both inside and outside)
- SAVES TIME - no charts, tables, calculators, mathematical formulas or tedious coping
- MADE IN U.S.A. - lightweight, heavy-duty stainless steel, 16GA construction
- Large, easy-to-read LED display
- Displayed value in Miter Cut mode is actual saw setting-eliminates error-prone calculations
- Displayed value in Single Cut mode is actual saw setting for butt joints-eliminates error-prone calculations
- Saves time and reduces waste while eliminating the math
- Simple 3-button control with all modes clearly designated in the display
- Three in one: digital angle finder, calculation for miter saw setting and vial level
- Easy-to-read with hold function and dual backlit rotating flip display
- Digital accuracy of angle finder up to 0.2 Degree; accuracy of level and plumb vials up to 0.029 Degree
- Freezes the display on the screen by hold function for read and note
- Extension leg for flexible usage
- Magnetic base securely attaches gauge to any metal surface
- Large LCD display reads upright at any angle
- Check drill press table setting, table saw, jointer table, band saw, jointer fence or band saw tab
- Setting blade angle of Circular Saws and Miter Saws .
- This inclinometer (angle measuring device) can be used to measure angles within +/-180 degree (0 ~ 360 degree ) range in wide variety of applications. You can simply place the meter on a reference surface zero, then it will give a result of measured angle within 0.3 degree accuracy.
- ACCURATE------Digital stainless steel ruler and angle finder combo makes precise measurements for easy woodworking
- CONVENIENCE------Digital protractor has lock and reverse angle functions that make all types of work easy and fast
- FULL ANGLE------Hinge mechanism on the angle rule allows a full 360-degrees to measure inside outside and reverse angles
- FEATURES------Woodworking tool can be zeroed at any point in the swing; digital measuring stick has a length of 12 inches
- LCD DISPLAY------Protractor comes with a large easy-to-read LCD display; never guess or eye ball the angle and length again with one convenient tool
- 4 x 90° measurment range with ±0.01° at 0° & 90° and ±0.05° at 2~89°
- Magnetic base with zero setting to current angle and self calibration
- Units of measurement: °degrees; %; mm/m; IN/FT
- Blacklight function with clear display
- Ideal for carpentry, construction, circular saw works and machine industry
- ▲ABSOLUTE AND RELATIVE MEASUREMENT - Press the CALIBRATE button to calibrate the angle gauge to any reference surface; Press UNIT button to convert between relative/absolute angles in degrees and tilt percent
- ▲ONE FOR THREE - Protractor, angle finder and level in one measuring tool; Super large LCD lets you read easily and clearly; Flip display to view angle in any direction; Measuring range: 360 degrees(4×90°); Resolution: 0.1°
- ▲DURABLE DESIGN - Embedded strong magnets firmly and securely attaches to any metal surface; Zinc alloy shell is more sturdy; Compact and portable size is convenient for using with other measuring tools
- ▲MULTIPLE FUNCTIONS - Data hold function; Low power indication; Automatic shutdown after 3 minutes without any operation; Long press the shutdown key 4s to shutdown manually
- ▲PACKAGE CONTENTS - Tacklife MDP02 Angle Gauge; Carrying Bag; User Manual; Warranty Card; 24 Months Warranty
- Description: - A miter gauge consists of a long thin guide, which rides in the miter slot of your t
- able saw (some band saws also have miter slots), and guides the miter gauge parallel to the blade.
- - Attached to this guide is a half-moon shaped piece that pivots on its connection point to the gui
- e. - A locking mechanism then allows this pivoting section to be locked into any angle. - A board
- is placed against the flat section of the gauge and the entire assembly (miter gauge and board) is
- Measuring Range: 4 x 90° / Resolution: 0.1°
- Repeatability: ±0.3° / Operataing Temperature: 0~40°C / Operating Humidity: 40~80%
- Power Supply: 3 x 3V CR2032 Battery (Included in set)
- Displays result remains upright
- Absolute and relative measurements conversion
- MULTI-PURPOSE: cutting and slicing meat and vegetables in the kitchen, sharpining knife, oyster shucking, filleting fish, wood carving, handling sharp tools or picking up broken glass, carpentry works, and so much more.. STRONGLY RECOMMENDED to wear the gloves using MANDOLINE, KNIVES, SLICER, GRATER.
- CUT RESISTANT gloves made with level 5 cut proof material - highest available on the market, which is 4 times stronger than leather, FOOD SAFE.
- EXCELLENT GRIP with a snug fit, the cut gloves are flexible and breathe well. Light weight creates additional comfort and convenience.
- CERTIFIED safety gloves meet EN388 Std., they provide protection for your hands, wrists, palms and fingers against major injuries. Additionally the gloves endowed with improved abrasion and tear resistance.
- 4 SIZES AVAILABLE: Small, Medium, Large, X-Large. SUITABLE for men, women and children (see size chart in images).
- 6-Inch Capacity
- Magnetic Base
- Accutrate to 0.0005-Inch
- Fraction Display
- Heavy Duty
- 4 x 90° measurment range
- Large and clear LCD display with Blacklight function
- Magnetic base with zero setting to current angle and self calibration
- Great tool for carpentry, construction and machine industry
- 4 units of measurement selection (°degrees; %; mm/m; IN/FT)
- Thickness: approx.9.5mm Width: approx.19mm
- With stainless steel closing rings in the two ends.
- Extruded aluminum miter bar.
- Adjustable stainless steel runner for perfect sliding action.
- For building various jigs on your table saw, like miter sleds etc.
- Fully adjustable for inside and outside corners
- Instantly calculates miter angles
- Digital LCD
- In-built miter saw compatibility function
- 1.2mm stainless steel construction
- Description: 300mm Aluminium Alloy Rail Miter Bar Slider Table Saw Gauge Rod Woodworking Tool Spec
- ification: Material: Aluminium Alloy Color: Silver Length: 300mm Width: Approx. 19mm / 0.748'' Thic
- ness: Approx. 9.5mm / 0.374'' Package Weight: 150g Features: This is a miter bar usually used in ta
- le saw woodworking works. Universal threaded mounting holes for convenient use. Adjustable stainles
- steel runner for perfect sliding action. For building various jigs on your table saw, like miter s
- Material: alloy
- Color: red and silver
- High hardness, will not rust, suitable for the production of reinforced frame, tank production, etc
- Maximum clip 7.5cm, while generally used for a group of four
- Diagonal connection and reinforcement reinforcement, connecting more weight, withstand greater gravity
Last update on 2018-01-08 / Affiliate links / Images from Amazon Product Advertising API - More info
I can’t afford the best digital miter saw on your list – what to do?
All the digital miter saw on our lists are great – just because it’s the first or even the second one does not mean it’s not a good buy – you should simply pick the best digital miter saw that you can afford. don’t over stress about buying a digital miter saw that does not fit your own budget, pick a few that sit well inside your spending limit and make your choice from those. remember that a cheaper digital miter saw does not mean it’s good. there are plenty of expensive digital miter saw that are actually not that great. higher price does not always mean great quality.
Can I return my digital miter saw if i am not happy with it?
Amazon overall have a great return policy is something is not right with your digital miter saw (or anything else you buy from there) but also every product have a different warranty policy. we urge you to read and look carefully at the specific digital miter saw you are looking to buy and see if the return policy there suits your needs.
I’m a little confuse with the huge variety of digital miter saw – what to do?
It’s very natural to be a bit overwhelmed with the huge variety of digital miter saw you can buy today. but remember that having so many digital miter saw to pick from is great to us as customers.
try to narrow down your list to around 3 of the best digital miter saw you can find (that fits your budget) and take it from there.
More Best Products:
Best hi lumen flashlight Reviews